Tag: M.W=100-200

115-20-8, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 115-20-8 as follows.

Carbon monoxide was bubbled through a solution of 11′- iodovinorelbine (151 mg, 0.167 mmol), triethylamine (169 mg, 1.67 mmol) and bis (triphenylphosphine) palladium (II) dichloride (23 mg, 0.033 mmol) in a mixture of DMF/2,2, 2-trichloroethanol (4 mL, 1 : 1) for 5 min. The reaction mixture was heated at 50 C for 14 h under one atmosphere of carbon monoxide (balloon). The solution was diluted with ethyl acetate (35 mL) then washed with saturated NaHC03 (2 x 20 mL) and brine (20 mL), dried over MgS04, and evaporated to dryness in vacuo. The residue was purified by reverse phase chromatography (C18, acetonitrile/water, 0.05% TFA) to provide 11′- (2,2, 2-trichloroethoxycarbonyl) lvinorelbine Trifluoroacetate (78 mg, 40% yield) as a white powder after lyophilization

The chemical industry reduces the impact on the environment during synthesis 115-20-8, I believe this compound will play a more active role in future production and life.

Reference:
Patent; AMR TECHNOLOGY, INC.; WO2005/55943; (2005); A2;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

870-72-4, In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 870-72-4, name is Hydroxymethanesulfonic Acid Sodium Salt, the common compound, a new synthetic route is introduced below.

In a 1 L separable flask equipped with a mechanical stirrer, 3- (ethoxymethyl) aniline (15.1 g, 100 mmol),Sodium formaldehyde bisulfite(13.8 g, 100 mmol) and water (23.5 mL) were added, and aniline derivative 7 was synthesized by vigorous stirring at 70 C. for 1 hour and a half, and cooled in an ice bath at 0 C. After cooling, water (150 mL) was added, and the previously prepared aqueous solution of 4-nitrobenzendiazonium chloride (benzenediazonium salt 2) was added dropwise at 0 C. over 5 minutes. The reaction mixture was stirred for 3 hours while gradually warming to room temperature.

Statistics shows that 870-72-4 is playing an increasingly important role. we look forward to future research findings about Hydroxymethanesulfonic Acid Sodium Salt.

Reference:
Patent; JNC Corporation; JNC Petrochemical Co., Ltd.; Sagami Central Chemical Research Institute; Kobayashi, Osamu; Ichijo, Hiroki; Hirai, Kenji; Fujima, Daisuke; Koseki, Yohei; (61 pag.)JP2019/156841; (2019); A;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

621-63-6 , The common heterocyclic compound, 621-63-6, name is 2,2-Diethoxyethanol, molecular formula is C6H14O3, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

(d) 2,2-Diethoxyethyl (2S)-2-(Acetyloxy)phenylacetate A 3-necked, 250 mL, round bottom flask equipped with a stir bar and a condenser is charged with 2,2-diethoxyethanol (10 g), dry methylene chloride (100 mL) and triethylamine (9 g). The mixture is cooled to 0-5¡ã C. over a period of 1-2 hours. The flask is slowly charged with (2S)-2-(acetyloxy)phenylacetyl chloride (16.6 g) while maintaining IT<10¡ã C. over a period of 0.5-1 hour. The reaction is stirred at 15-20¡ã C. for 1-2 hours. The reaction mixture is filtered and the filter cake is washed with dichloromethane (10 mL). The organic layer is transferred to a separatory funnel and washed with deionized water (2*40 mL) followed by brine (1*30 mL). The organic layer is dried over anhydrous sodium sulfate and evaporated to give 21 g of 2,2-diethoxyethyl (2S)-2-(acetyloxy)phenylacetate as a syrup. According to the analysis of related databases, 621-63-6, the application of this compound in the production field has become more and more popular. Reference:
Patent; Brantford Chemicals Inc.; US6380388; (2002); B1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

100-37-8, Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 100-37-8, name is 2-(Diethylamino)ethanol. This compound has unique chemical properties. The synthetic route is as follows.

180 g of 2-acetylsalicylic acid,And dissolved in 1000 ml of chloroform.The mixture was cooled to 5 C. 103 g of 1,3-Dicyclohexylcarbodiimide was added to the mixture.The mixture was stirred at room temperature for 2 hours. Solid waste is filtered out,It was washed with chloroform (3 ¡Á 300 ml).59 g of diethylaminoethanol was added to the reaction mixture.The mixture was stirred at room temperature for 3 hours. The organic solution was evaporated.After drying 220 g of the desired product was obtained (96%).

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 100-37-8, 2-(Diethylamino)ethanol.

Reference:
Patent; Yu, Chauncy; Tech Fields Inc.; Schuh, Rina; (73 pag.)JP2017/105853; (2017); A;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

As we all know, there are many different methods for the synthesis of a compound, and people can choose the synthesis method that suits their own laboratory according to the actual situation. 100-37-8, name is 2-(Diethylamino)ethanol, molecular formula is C6H15NO, The compound is widely used in many fields, so it is necessary to find a new synthetic route. The downstream synthesis method of this compound is introduced below. 100-37-8

1. Synthesis of diethyl-[2-(2-methyl-[1,10]phenanthrolin-4-yloxy)-ethyl]amine To a suspension of sodium hydride (60% in mineral oil, 5.25 g, 131.1 mmol) in anhydrous THF (90 mL) a solution of N,N-diethyl-2-hydroxyethylamine (15.30 g, 131.1 mmol) in anhydrous THF (60 mL) was slowly added. The mixture was stirred at room temperature for 20 minutes and a solution of 4-chloro-2-methyl-[1,10]phenanthroline(6.00 g, 26.2 mmol) in anhydrous THF (90 mL) was slowly added. The reaction mixture was refluxed for 18 hours and then allowed to cool down to room temperature, quenched with 1 N HCl and evaporated. The residue was redissolved in 1N NaOH (150 mL) and extracted with methylene chloride (3 x 200 mL). The combined organic layers were dried (Na2SO4), filtered and concentrated in vacuo. The residue was washed with hexane and purified by flash chromatography (SiO2, MeOH/DCM, 1:40) to yield the pure product as an orange oil (5.1 g, 63%).

The chemical industry reduces the impact on the environment during synthesis 100-37-8, I believe this compound will play a more active role in future production and life.

Reference:
Patent; NOSCIRA, S.A.; EP2002863; (2008); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Each compound has different characteristics, and only by selecting the characteristics of the compound suitable for a specific situation can the compound be applied on a large scale. 2807-30-9, name is 2-Propoxyethanol. This compound has unique chemical properties. The synthetic route is as follows. 2807-30-9

100 g of 2-n-propoxyethanol,0.1 g of dodecyltrimethylammonium chloride was addedIn a reaction vessel equipped with a reflux condenser,120 g of thionyl chloride (content 99.0%Sulfuryl chloride content of 0.1%) by adding constant pressure dropping funnel,Stirring, slow to the reaction container dropwise addition of thionyl chloride, the reaction process release sulfur dioxide and hydrogen chloride gas,The temperature of the reaction solution was maintained at 30 ¡À 5 C by controlling the dropwise addition of thionyl chloride.Dropping of sulfoxide is completed, turn on heating,The temperature was gradually raised to 90 C according to the reaction gas evolution rate,Until no gas release, continue to heat 2h get crude; Crude direct distillation purification,105.9 g of chloroethyl n-propyl ether was obtained,After testing, product chromatographic content of 99.51%The water content was 0.17% and the yield was 89.97%.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 2807-30-9, 2-Propoxyethanol.

Reference:
Patent; Shandong Kaisheng New Materials Co., Ltd.; Zhang, Taiming; Bi, Yixia; Wang, Ronghai; Zhang, Shanmin; Li, Wenjuan; Jia, Yuanchao; (6 pag.)CN105348051; (2016); A;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

770-71-8, Adding a certain compound to certain chemical reactions, such as: 770-71-8, Adamantan-1-ylmethanol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 770-71-8, blongs to alcohols-buliding-blocks compound.

Preparation 7.2 Adamant-1-ylmethyl methanesulfonate (III) A mixture of 3 g of adamantan-1-ylmethanol and 5 ml of triethylamine in 50 ml of DCM is cooled to 0 C., 2 ml of methanesulfonyl chloride are added dropwise, and the mixture is left to stir while allowing the temperature to return to AT. A mixture of water/ice is added to the reaction mixture, the mixture is extracted with DCM, the organic phase is dried over Na2SO4, and the solvent is evaporated off under vacuum. 2 g of the expected compound are obtained.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,770-71-8, its application will become more common.

Reference:
Patent; SANOFI-AVENTIS; US2009/281107; (2009); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

623-50-7, Adding a certain compound to certain chemical reactions, such as: 623-50-7, Ethyl 2-hydroxyacetate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 623-50-7, blongs to alcohols-buliding-blocks compound.

2-Chloro-3-pyridinecarbonitrile, 1 , (4.0Og, 28.9mmol), Cs2CO3 (28.2g, 86.6mmol) and ethyl glycolate (3mL, 31.7mmol) were placed in a flask under Ar(g). Dry NMP was added, and the suspension was heated at 75C for 2Oh with vigorous stirring. The reaction mixture was cooled to rt, whereupon water (200 mL) and Et2theta (3 x 10OmL) were added. The organic layers were combined, washed with water (3 x 15mL) before being dried (MgSO4) and concentrated in vacuo. Purification by flash column chromatography on silica (eluant 15-40% EtOAc/Hex) gave 2 (2.41 g, 1 1 Jmmol, 40%) as a white solid.1H NMR (400MHz, CDCI3) deltaH: 8.51 (dd, J=5.0, 2.0Hz, 1 H), 7.96 (dd, J=8.0, 2.0Hz, 1 H), 7.23-7.28 (m, 1 H), 4.44 (q, J=7.0Hz, 2H), 4.01 (br. s., 2H), 1.44 (t, J=7.0Hz, 3H).MS (ES+) 229 (100%, [M+Na]+).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,623-50-7, its application will become more common.

Reference:
Patent; KARUS THERAPEUTICS LIMITED; SHUTTLEWORTH, Stephen Joseph; CECIL, Alexander Richard Liam; HILL, Thomas James; SILVA, Franck Alexandre; WO2011/21038; (2011); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 115-20-8, Trichloroethanol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, 115-20-8, blongs to alcohols-buliding-blocks compound. 115-20-8

General procedure: 3-Hydroxy-2-((S)-1-phenylethyl)isoindolin-1-one 1 (150 mg, 0.592 mmol, Entries 1-3, Table 1) or (100 mg, 0.395 mmol, (Entries 4-11, Table 1) was dissolved in dichloromethane (3.0 mL) under an inert atmosphere (N2) while stirring followed by the addition diethylaminosulfur trifluoride (DAST, 240 L, 1.776 mmol, 3 eq). Stirring was continued overnight (16 hr) and the alcohol (10 or 5 eq) was added and stirring was continued until the reaction was complete as indicated by TLC (4-8 hr). The crude reaction mixture was directly submitted to gravity-column chromatography and the entire series of products were eluted with hexane/ethyl acetate, 4:1. Combination and concentration of the individual fractions gave the pure products detailed in Table 1.

With the rapid development of chemical substances, we look forward to future research findings about 115-20-8.

Reference:
Article; Ronnebaum, Jarrid M.; Luzzio, Frederick A.; Arkivoc; vol. 2019; 5; (2019);,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

624-95-3, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 624-95-3 as follows.

16.9 g of 3, 3-Dimethyl-l-butanol (117.3 mmol) and 0.0765 g MeO TEMPO (0. 411MMOL) are charged in a jacketed glass reaction flask as in Example I. Sodium borate (0.380 g, 1.0 mmol) and Zr (acetate) 2 (0.2 g solution, 0.1 mmol) are dissolved in water (12.0 cc) and the aqueous solution is added to the stirred organic fraction at 1000 RPM in the reaction flask. The stirred suspension is cooled to 0C and the emulsion is re- adjusted to pH=8.4 using 50% solution of CH3COOH. When the temperature of the reactants reached 0C, 75.5 g (122 mmol) of 12.1% aqueous NAOCI solution are pumped in via a gas-tight syringe over 90 minutes (The pH of the bleach solution was adjusted to 10 using 50% aqueous CH3COOH). During the bleach addition the pH was maintained at 8.3-8. 4 levels using few drops of 50% aqueous CH3COOH. The reaction mixture is stirred for an additional 120 min at 0C and the organic layer is sampled for GC assay. The reaction in this second stage was kept at pH 8.4 by addition of 0.2-0. 25 cc aqueous solution OF NAOH (50% concentration). The yield of 3, 3-dimethylbutyraldehyde is 95.0% at 60 min and 93.0% at 90 min reaction time.

The chemical industry reduces the impact on the environment during synthesis 624-95-3, I believe this compound will play a more active role in future production and life.

Reference:
Patent; THE NUTRASWEET COMPANY; WO2004/67484; (2004); A2;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts