Xiang, Jun et al. published their research in ACS Applied Materials & Interfaces in 2018 | CAS: 60463-12-9

3-(Hydroxymethyl)-4-nitrophenol (cas: 60463-12-9) belongs to alcohols. Alcohols are weak acids. The most acidic simple alcohols (methanol and ethanol) are about as acidic as water, and most other alcohols are somewhat less acidic. Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions.Related Products of 60463-12-9

Nanocomplexes of Photolabile Polyelectrolyte and Upconversion Nanoparticles for Near-Infrared Light-Triggered Payload Release was written by Xiang, Jun;Ge, Feijie;Yu, Bing;Yan, Qiang;Shi, Feng;Zhao, Yue. And the article was included in ACS Applied Materials & Interfaces in 2018.Related Products of 60463-12-9 This article mentions the following:

A new approach to encapsulating charged cargo mols. into a nanovector and subsequently using near-IR (NIR) light to trigger the release is demonstrated. NIR light-responsive nanovector was prepared through electrostatic interaction-driven complexation between neg. charged silica-coated upconversion nanoparticles (UCNP@silica, 87 nm hydrodynamic diameter, polydispersity index ∼0.05) and a pos. charged UV-labile polyelectrolyte bearing pendants of poly(ethylene glycol) and o-nitrobenzyl side groups; whereas charged fluorescein (FLU) was loaded through a co-complexation process. By controlling the amount of polyelectrolyte, UCNP@silica can be covered by the polymer, whereas remaining dispersed in aqueous solution Under 980 nm laser excitation, UV light emitted by UCNP is absorbed by photolytic side groups within polyelectrolyte, which results in cleavage of o-nitrobenzyl groups and formation of carboxylic acid groups. Such NIR light-induced partial reversal of pos. charge to neg. charge on the polyelectrolyte layer disrupts the equilibrium among UCNP@silica, polyelectrolyte, and FLU and, consequently, leads to release of FLU mols. In the experiment, the researchers used many compounds, for example, 3-(Hydroxymethyl)-4-nitrophenol (cas: 60463-12-9Related Products of 60463-12-9).

3-(Hydroxymethyl)-4-nitrophenol (cas: 60463-12-9) belongs to alcohols. Alcohols are weak acids. The most acidic simple alcohols (methanol and ethanol) are about as acidic as water, and most other alcohols are somewhat less acidic. Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions.Related Products of 60463-12-9

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Guo, Jun et al. published their research in Chemical Communications (Cambridge, United Kingdom) in 2015 | CAS: 120121-01-9

(R)-1-(3-Chlorophenyl)ethanol (cas: 120121-01-9) belongs to alcohols. The oxygen atom of the strongly polarized O―H bond of an alcohol pulls electron density away from the hydrogen atom. This polarized hydrogen, which bears a partial positive charge, can form a hydrogen bond with a pair of nonbonding electrons on another oxygen atom. Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.Related Products of 120121-01-9

Cobalt-catalyzed asymmetric hydroboration of aryl ketones with pinacolborane was written by Guo, Jun;Chen, Jianhui;Lu, Zhan. And the article was included in Chemical Communications (Cambridge, United Kingdom) in 2015.Related Products of 120121-01-9 This article mentions the following:

The highly enantioselective cobalt-catalyzed hydroboration reaction of aryl ketones with HBpin was developed using iminopyridine oxazoline ligands. Halides, amines, ethers, sulfides, esters and amides are well tolerated under the mild reaction conditions, demonstrating its synthetic advantage. Substituted diaryl ketones could also be hydroborated with high enantioselectivity. In the experiment, the researchers used many compounds, for example, (R)-1-(3-Chlorophenyl)ethanol (cas: 120121-01-9Related Products of 120121-01-9).

(R)-1-(3-Chlorophenyl)ethanol (cas: 120121-01-9) belongs to alcohols. The oxygen atom of the strongly polarized O―H bond of an alcohol pulls electron density away from the hydrogen atom. This polarized hydrogen, which bears a partial positive charge, can form a hydrogen bond with a pair of nonbonding electrons on another oxygen atom. Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.Related Products of 120121-01-9

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Zhang, Bin et al. published their research in Food Chemistry in 2022 | CAS: 3391-86-4

Oct-1-en-3-ol (cas: 3391-86-4) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Formula: C8H16O

Evaluation of the adsorption capacity and mechanism of soy protein isolate for volatile flavor compounds: Role of different oxygen-containing functional groups was written by Zhang, Bin;Zhang, Jingwen;Yu, Xiaobo;Peng, Jing;Pan, Leiqing;Tu, Kang. And the article was included in Food Chemistry in 2022.Formula: C8H16O This article mentions the following:

Mechanism of soy protein isolate (SPI) adsorbing isomers of volatile flavor compounds (VFCs: 2-octanone, 1-octen-3-ol and octanal) were investigated by exploring the interaction between different oxygen-containing functional groups (OCF groups: carbonyl, alc. hydroxyl and aldehyde group) and SPI in this study. VFCs made SPI aggregate into larger particle size, and an increase in β-sheet and β-turn was observed Octanal has strongest binding capacity to SPI, followed by 1-octen-3-ol and 2-octanone. Fluorescence anal. revealed that static quenching occurred between the VFCs and SPI, which suggested that SPI-VFCs complex were formed. Double logarithmic Stern-Volmer indicated the strongest interaction between aldehyde group and SPI, which was proved by surface plasmon resonance. Finally, mol. docking results showed more hydrogen bonds between octanal and SPI. The results showed that aldehyde groups were more likely to interact with SPI than others, probably due to their tendency to form more hydrogen bonds. In the experiment, the researchers used many compounds, for example, Oct-1-en-3-ol (cas: 3391-86-4Formula: C8H16O).

Oct-1-en-3-ol (cas: 3391-86-4) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.Formula: C8H16O

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Guo, Qi et al. published their research in LWT–Food Science and Technology in 2022 | CAS: 499-75-2

5-Isopropyl-2-methylphenol (cas: 499-75-2) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Application In Synthesis of 5-Isopropyl-2-methylphenol

Formulation and characterization of microcapsules encapsulating carvacrol using complex coacervation crosslinked with tannic acid was written by Guo, Qi;Li, Shuai;Du, Gengan;Chen, Hong;Yan, Xiaohai;Chang, Shuaidan;Yue, Tianli;Yuan, Yahong. And the article was included in LWT–Food Science and Technology in 2022.Application In Synthesis of 5-Isopropyl-2-methylphenol This article mentions the following:

Carvacrol-loaded microcapsules were developed based on coacervation complexes of whey protein isolate (WPI) and high methoxyl pectin (HMP), followed by crosslinking with tannic acid (TA). Optimal pH and WPI-HMP ratios for complex coacervation were found to be 4.1 and 5:1, resp. Coacervation complexes were used to encapsulate carvacrol. Optimum conditions for achieving morphol. and encapsulation efficiency were found for wall materials with a concentration of 2% (w/v), a wall/core ratio of 1:2 (w: w), and a homogenization speed of 15,000 rpm. The optimized formulation of microcapsules has an encapsulation efficiency of 77.48 ± 0.03% for carvacrol and a size of 1.08μm. The addition of tannic acid (TA) decreased particle size and had no other influence on the morphol. properties of microcapsules. Addnl., Fourier transform IR spectroscopy (FTIR) indicated that coacervates were formed through the electrostatic interactions between WPI and HMP and the main force between TA and coacervates is hydrogen bonding. The addition of HMP to WPI and the presence of TA both decreased the content of tryptophan residues. Carvacrol microcapsules crosslinked with TA demonstrated better stability and antioxidant properties, showing potential for encapsulation of bioactive substances. In the experiment, the researchers used many compounds, for example, 5-Isopropyl-2-methylphenol (cas: 499-75-2Application In Synthesis of 5-Isopropyl-2-methylphenol).

5-Isopropyl-2-methylphenol (cas: 499-75-2) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Application In Synthesis of 5-Isopropyl-2-methylphenol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Hoque, Asmaul Md et al. published their research in Journal of the American Chemical Society in 2022 | CAS: 873-76-7

(4-Chlorophenyl)methanol (cas: 873-76-7) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Name: (4-Chlorophenyl)methanol

Electrochemical PINOylation of Methylarenes: Improving the Scope and Utility of Benzylic Oxidation through Mediated Electrolysis was written by Hoque, Asmaul Md;Twilton, Jack;Zhu, Jieru;Graaf, Matthew D.;Harper, Kaid C.;Tuca, Emilian;DiLabio, Gino A.;Stahl, Shannon S.. And the article was included in Journal of the American Chemical Society in 2022.Name: (4-Chlorophenyl)methanol This article mentions the following:

A mediated electrosynthetic method has been developed for selective benzylic oxidation of methylarenes RCH3 (R = Ph, 4-chlorophenyl, pyridin-3-yl, 1,3-thiazol-2-yl, etc.). Phthalimide-N-oxyl (PINO) radical generated by proton-coupled electrochem. oxidation of N-hydroxypthalimide serves as a hydrogen atom-transfer (HAT) mediator and as a radical trap for the benzylic radicals generated in situ. This mediated electrolysis method operates at much lower anode potentials relative to direct electrolysis methods for benzylic oxidation initiated by single-electron transfer (SET). A direct comparison of SET and mediated-HAT electrolysis methods with a common set of substrates shows that the HAT reaction exhibits a significantly improved substrate scope and functional group compatibility. The PINOylated products I and II are readily converted into the corresponding benzylic alc. RCH2OH or benzaldehyde derivatives RCHO under photochem. conditions, and the synthetic utility of this method is highlighted by the late-stage functionalization of the non-steroidal anti-inflammatory drug celecoxib. In the experiment, the researchers used many compounds, for example, (4-Chlorophenyl)methanol (cas: 873-76-7Name: (4-Chlorophenyl)methanol).

(4-Chlorophenyl)methanol (cas: 873-76-7) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Name: (4-Chlorophenyl)methanol

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Karpman, Ya. S. et al. published their research in Khimiya Geterotsiklicheskikh Soedinenii in 1980 | CAS: 1122-71-0

6-Methyl-2-pyridinemethanol (cas: 1122-71-0) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions.Related Products of 1122-71-0

Sequence of hydrogen replacement by lithium or halogen in 2,6-dimethylpyridine was written by Karpman, Ya. S.;Azimov, V. A.;Anisimova, O. S.;Yakhontov, L. N.. And the article was included in Khimiya Geterotsiklicheskikh Soedinenii in 1980.Related Products of 1122-71-0 This article mentions the following:

Reaction of 2,6-lutidine (I) with PhLi in ether with a 1:8 molar ratio of reagent at either room temperature or reflux did not give the dilithio derivatives but gave the monolithio derivatives I did not react with 2.5 mol Br in glacial HOAc at 80-100° without a catalyst or in the presence of ZnCl2 or excess NaOAc. Chlorination of I did not take place at reflux with a 5-fold excess of SO2Cl2. In the experiment, the researchers used many compounds, for example, 6-Methyl-2-pyridinemethanol (cas: 1122-71-0Related Products of 1122-71-0).

6-Methyl-2-pyridinemethanol (cas: 1122-71-0) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions.Related Products of 1122-71-0

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Wang, Yang et al. published their research in Composites, Part B: Engineering in 2022 | CAS: 873-76-7

(4-Chlorophenyl)methanol (cas: 873-76-7) belongs to alcohols. Under appropriate conditions, inorganic acids also react with alcohols to form esters. To form these esters, a wide variety of specialized reagents and conditions can be used. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.SDS of cas: 873-76-7

Integrating photogenerated charge carriers for hydrogen production on noble-metal free dual-photocatalyst under visible light was written by Wang, Yang;Yang, Jiawen;Qin, Xiru;Zhuang, Jiayi;Yin, Wujie;Chen, Tingting;Yao, Yong. And the article was included in Composites, Part B: Engineering in 2022.SDS of cas: 873-76-7 This article mentions the following:

Simultaneous using photogenerated electrons and holes in one reaction to produce H2 and value-added organic intermediates hold great promise for the green synthesis of chems. and clean energy. Herein, we designed an efficient, noble-metal free and dual-photocatalyst Ni/Zn3In2S6 for simultaneous aldehydes synthesis and H2 production under visible light irradiation Due to the reasonable band structure of Zn3In2S6 and the Schottky barrier established between Zn3In2S6 and Ni, the photogenerated electrons and holes with suitable redox potentials can be spatially separated and efficiently transferred. Thereby, alcs. can be highly selective oxidized into corresponding aldehydes or carbonyl compounds at Zn3In2S6 by the holes, and the released protons can be rapidly reduced into H2 at Ni by the electrons. The H2 evolution of the optimal Ni/Zn3In2S6 can reach up to 277.2μmol h-1, which is about 6.5 and 5.3 times as high as that of the pristine Zn3In2S6 and the Pt/Zn3In2S6, resp. Ni/Zn3In2S6 also shows the stability and general applicability for other aromatic and non-aromatic alcs. Compared with NiSx, NiOx and Ni2+ cocatalysts, the metallic state of Ni is the key to achieving these photoredox reactions for effective utilization of photoexcited holes and electrons in one reaction system. During the photoredox reactions, two protons derived from O-H and Cα-H are abstracted from alcs. and then reduced into H2 by the photogenerated electrons. At the same time, alcs. are oxidized into aldehydes or carbonyl compounds by the photogenerated holes. In the experiment, the researchers used many compounds, for example, (4-Chlorophenyl)methanol (cas: 873-76-7SDS of cas: 873-76-7).

(4-Chlorophenyl)methanol (cas: 873-76-7) belongs to alcohols. Under appropriate conditions, inorganic acids also react with alcohols to form esters. To form these esters, a wide variety of specialized reagents and conditions can be used. Tertiary alcohols cannot be oxidized at all without breaking carbon-carbon bonds, whereas primary alcohols can be oxidized to aldehydes or further oxidized to carboxylic acids.SDS of cas: 873-76-7

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Marshall, Tatianna et al. published their research in Colloids and Surfaces, A: Physicochemical and Engineering Aspects in 2022 | CAS: 149-32-6

(2R,3S)-rel-Butane-1,2,3,4-tetraol (cas: 149-32-6) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.Formula: C4H10O4

Mechanisms of solvent separation using sugars and sugar alcohols was written by Marshall, Tatianna;Marangoni, Alejandro G.;Laredo, Thamara;Al-Abdul-Wahid, M. Sameer;Pensini, Erica. And the article was included in Colloids and Surfaces, A: Physicochemical and Engineering Aspects in 2022.Formula: C4H10O4 This article mentions the following:

This study uses sugars (dextrose, sucrose, ribose, fructose and mannose) and sugar alcs. (maltitol, erythritol, sorbitol, xylitol) to sep. water from THF (THF) and acetonitrile (AN). Bottle tests and NMR (NMR) show that above 0.25 M all sugars and sugar alcs. effectively sep. water from either THF or AN. At 0.5 M concentrations, maltitol and sucrose yield a non-negligible interfacial tension between AN and water, while the interfacial tension is negligible with all other compounds This indicates that while all compounds have similar separation effectiveness above a benchmark concentration, maltitol and sucrose (which are dimers) have a stronger effect on water structure compared to the other compounds tested (which are monomers). Attenuated Total Reflectance – Fourier Transform IR spectroscopy (ATR-FTIR) was used to explain solvent separation, based on the effect of sugars on hydrogen bonding (H-bonding) and on the nitrile band. The H-bonding peak was deconvolved into peaks representative of different water clusters, comprised of water mols. donating and accepting a different number of H-bonds. Principal component anal. (PCA) shows that single H-bond donors (SD) (at approx. 3200 cm-1) and double H-bond donor (DD) (at approx. 3400 cm-1) are most affected by maltitol and sucrose. All sugars tested induce a blue shift of the H-bonding of absorbance peaks for DD and SD, in either water or in mixtures of water-AN and water-THF. This indicates that they strengthen H-bonding in these clusters. The effect of all sugars is comparable when concentrations are expressed as OH equivalent Sugars increase the ratio between the amplitude A of SD relative to DD, and SD are most effective at structuring water. The difference between the ratio A(SD)/A(DD) after and before sugar addition is lowest in water (≈0.9), followed by THF-water mixtures (≈1.1) and AN-water mixtures (≈1.2). This indicates that solvents enhance the effect of sugars on H bonding. This is likely because sugars are not soluble in either THF or AN, which therefore excludes them and promotes their interactions with water. In turn, water-sugar H-bonding weakens interactions between AN-water or THF-water, leading to solvent separation The anal. of the nitrile band shows that sugars and sugar alcs. increase the relative amount of free nitrile, which is correlated to weaker interactions between AN and water. Maltitol and sucrose display approx. two times the relative amount of free nitrile compared to dextrose and erythritol. Our study confirms that sugars and sugar alcs. weaken solvent-water interactions, and reveals that they sep. solvents by increasing the proportion of SD relative to DD. In the experiment, the researchers used many compounds, for example, (2R,3S)-rel-Butane-1,2,3,4-tetraol (cas: 149-32-6Formula: C4H10O4).

(2R,3S)-rel-Butane-1,2,3,4-tetraol (cas: 149-32-6) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.Formula: C4H10O4

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Ikeda, Shuhei et al. published their research in Journal of Medicinal Chemistry in 2021 | CAS: 142253-56-3

1-Boc-Azetidine-3-yl-methanol (cas: 142253-56-3) belongs to alcohols. The oxygen atom of the strongly polarized O―H bond of an alcohol pulls electron density away from the hydrogen atom. This polarized hydrogen, which bears a partial positive charge, can form a hydrogen bond with a pair of nonbonding electrons on another oxygen atom. Alcohols may be oxidized to give ketones, aldehydes, and carboxylic acids. These functional groups are useful for further reactions. Oxidation of organic compounds generally increases the number of bonds from carbon to oxygen (or another electronegative element, such as a halogen), and it may decrease the number of bonds to hydrogen.Application of 142253-56-3

Design and Synthesis of Novel Spiro Derivatives as Potent and Reversible Monoacylglycerol Lipase (MAGL) Inhibitors: Bioisosteric Transformation from 3-Oxo-3,4-dihydro-2H-benzo[b][1,4]oxazin-6-yl Moiety was written by Ikeda, Shuhei;Sugiyama, Hideyuki;Tokuhara, Hidekazu;Murakami, Masataka;Nakamura, Minoru;Oguro, Yuya;Aida, Jumpei;Morishita, Nao;Sogabe, Satoshi;Dougan, Douglas R.;Gay, Sean C.;Qin, Ling;Arimura, Naoto;Takahashi, Yasuko;Sasaki, Masako;Kamada, Yusuke;Aoyama, Kazunobu;Kimoto, Kouya;Kamata, Makoto. And the article was included in Journal of Medicinal Chemistry in 2021.Application of 142253-56-3 This article mentions the following:

The therapeutic potential of monoacylglycerol lipase (MAGL) inhibitors in central nervous system-related diseases has attracted attention worldwide. However, the availability of reversible-type inhibitor is still limited to clarify the pharmacol. effect. Herein, we report the discovery of novel spiro chem. series as potent and reversible MAGL inhibitors with a different binding mode to MAGL using Arg57 and His121. Starting from hit compound 1 and its co-crystal structure with MAGL, structure-based drug discovery (SBDD) approach enabled us to generate various spiro scaffolds like 2a (azetidine-lactam), 2b (cyclobutane-lactam), and 2d (cyclobutane-carbamate) as novel bioisosteres of 3-oxo-3,4-dihydro-2H-benzo[b][1,4]oxazin-6-yl moiety in 1 with higher lipophilic ligand efficiency (LLE). Optimization of the left hand side afforded 4f (I) as a promising reversible MAGL inhibitor, which showed potent in vitro MAGL inhibitory activity (IC50 6.2 nM), good oral absorption, blood-brain barrier penetration, and significant pharmacodynamic changes (2-arachidonoylglycerol increase and arachidonic acid decrease) at 0.3-10 mg/kg, po. in mice. In the experiment, the researchers used many compounds, for example, 1-Boc-Azetidine-3-yl-methanol (cas: 142253-56-3Application of 142253-56-3).

1-Boc-Azetidine-3-yl-methanol (cas: 142253-56-3) belongs to alcohols. The oxygen atom of the strongly polarized O―H bond of an alcohol pulls electron density away from the hydrogen atom. This polarized hydrogen, which bears a partial positive charge, can form a hydrogen bond with a pair of nonbonding electrons on another oxygen atom. Alcohols may be oxidized to give ketones, aldehydes, and carboxylic acids. These functional groups are useful for further reactions. Oxidation of organic compounds generally increases the number of bonds from carbon to oxygen (or another electronegative element, such as a halogen), and it may decrease the number of bonds to hydrogen.Application of 142253-56-3

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Bruno, Olga et al. published their research in Journal of Medicinal Chemistry in 2009 | CAS: 42514-50-1

3-Amino-3-methylbutan-1-ol (cas: 42514-50-1) belongs to alcohols. Alcohols are weak acids. The most acidic simple alcohols (methanol and ethanol) are about as acidic as water, and most other alcohols are somewhat less acidic. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Synthetic Route of C5H13NO

New Selective Phosphodiesterase 4D Inhibitors Differently Acting on Long, Short, and Supershort Isoforms was written by Bruno, Olga;Romussi, Alessia;Spallarossa, Andrea;Brullo, Chiara;Schenone, Silvia;Bondavalli, Francesco;Vanthuyne, Nicolas;Roussel, Christian. And the article was included in Journal of Medicinal Chemistry in 2009.Synthetic Route of C5H13NO This article mentions the following:

The lack of selective inhibitors toward the long, short, or supershort phosphodiesterases (PDE4s) prevented researchers from carefully defining the connection between different enzyme isoforms, their brain localization, and their role in neurodegenerative diseases such as Alzheimer’s disease (AD). In the search for new therapeutic agents for treating memory and learning disorders, we synthesized new rolipram related PDE4 inhibitors, which had some selectivity toward the long form PDE4D3. The first series was synthesized as racemate and then resolved by semipreparative HPLC on chiral supports. Herein we report the synthetic pathways to obtain rolipram related compounds and their biol. activities and some SAR considerations that provide some insights and hints for the structural requirements for PDE4D subtype selectivity and enzyme inhibition. In the experiment, the researchers used many compounds, for example, 3-Amino-3-methylbutan-1-ol (cas: 42514-50-1Synthetic Route of C5H13NO).

3-Amino-3-methylbutan-1-ol (cas: 42514-50-1) belongs to alcohols. Alcohols are weak acids. The most acidic simple alcohols (methanol and ethanol) are about as acidic as water, and most other alcohols are somewhat less acidic. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Synthetic Route of C5H13NO

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts