9/16 News The origin of a common compound about 62285-58-9

The synthetic route of 62285-58-9 has been constantly updated, and we look forward to future research findings.

Adding a certain compound to certain chemical reactions, such as: 62285-58-9, (2,6-Dimethylphenyl)methanol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Recommanded Product: (2,6-Dimethylphenyl)methanol, blongs to alcohols-buliding-blocks compound. Recommanded Product: (2,6-Dimethylphenyl)methanol

General procedure 1 (GPl) Step l:To the commercially available alcohols (0.288 mmol), placed in vials (20 mL) equipped with screw caps, were added a solution of 2-(4-carboxymethyl-phenylsulfanylmethyl)-benzoic acid 2,2,2-trichloro-ethyl ester (125mg, 0.288mmol), EDCxHCl (83mg, 0.435mmol), DMAP (3.5mg, 0.029mmol) and DCM (4 mL). The reaction mixtures were stirred at rt overnight. The mixtures were quenched with 0.25M HCl (4 mL) and the two phases were separated through phase separators. The organic phases were concentrated and used without further purification into the next step.; Example 33 2-[4-(2,6-Dimethyl-benzyloxycarbonylmethyl)-phenylsulfanylmethyl]-benzoic acidThe titled compound was prepared according to GPl. Step 1: Using (2,6-dimethyl-phenyl)- methanol as the alcohol. Step 2: The reaction time was 2 days. Yield: 37mg (31 %). 1H NMR (600 MHz, (CD3)2SO, (CH3)2SO): delta 2.24 (s, 6H), 3.61 (s, 2H), 4.54 (s, 2H), 5.10 (s, 2H), 7.00 (d, 2H), 7.08-7.14 (m, 3H), 7.22 (d, 2H), 7.27-7.34 (m, 2H), 7.36-7.40 (m, IH), 7.82 (d, IH); Mass spectrum: M-H+ 419.

The synthetic route of 62285-58-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; ALBIREO AB; WO2008/108735; (2008); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Some tips on 62285-58-9

The synthetic route of 62285-58-9 has been constantly updated, and we look forward to future research findings.

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 62285-58-9, name is (2,6-Dimethylphenyl)methanol, the common compound, a new synthetic route is introduced below. Computed Properties of C9H12O

[0484] To a solution of (2,6-dimethyl-phenyl)-methanol (13.6 g, 100.00 mmol) in DCM (400 mL) was added PBr3 (5.7 g, 150.0 mmol) and pyridine (0.5 mL). The mixture was stirred at 0 C for 2 hrs. TLC showed the reaction was completed. The reaction was quenched with slow addition of ice water (50 mL). The aqueous phase was extracted with DCM (300 mL x3). The organic layer was washed with brine (500 mL), dried over Na2S04 and concentrated to give 2-bromom ethyl- 1,3 -dimethyl -benzene (19.1 g, yield: 96 %) as a yellow solid.

The synthetic route of 62285-58-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; SANFORD BURNHAM PREBYS MEDICAL DISCOVERY INSTITUTE; SMITH, Layton H.; PINKERTON, Anthony B.; HERSHBERGER, Paul; MALONEY, Patrick; MCANALLY, Danielle; (167 pag.)WO2019/32720; (2019); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Sources of common compounds: 62285-58-9

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 62285-58-9, (2,6-Dimethylphenyl)methanol, other downstream synthetic routes, hurry up and to see.

Application of 62285-58-9 ,Some common heterocyclic compound, 62285-58-9, molecular formula is C9H12O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 2,6-dimethylbenzyl alcohol (456 mg, 3.35 mmol) and triethylamine (0.560 mL, 4.02 mmol) in dichloromethane (CH2Cl2, 15 mL) was added methanesulfonyl chloride (0.258 mL, 3.68 mmol) under ice-cooling and the mixture was stirred for one hour. Thereto was subsequently added lithium bromide (LiBr, 582 mg, 6.70 mmol) under ice-cooling, and the mixture was warmed to room temperature and the mixture was stirred for 2 hours. Thereto was added water to quench the reaction and the reactant was extracted with ethyl acetate and the organic layer was washed twice with water. The organic layer was dried over anhydrous magnesium sulfate and filtered, and the solvent was evaporated under reduced pressure. The resulting residue was purified by silica gel column chromatography to give the title compound 364 mg as colorless oils. 1H-NMR delta (DMSO-d6); 2.37 (6H, s), 4.71 (2H, s), 7.04-7.16 (3H, m).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 62285-58-9, (2,6-Dimethylphenyl)methanol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Dainippon Sumitomo Pharma Co., Ltd.; EP1736467; (2006); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Application of (2,6-Dimethylphenyl)methanol

According to the analysis of related databases, 62285-58-9, the application of this compound in the production field has become more and more popular.

Application of 62285-58-9, The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 62285-58-9, name is (2,6-Dimethylphenyl)methanol. This compound has unique chemical properties. The synthetic route is as follows.

Step B: Preparation of Ethyl 3-(2,6-dimethylbenzyloxy)-4-methoxybenzoate: A solution of Ethyl 3-Hydroxy-4-methoxybenzoate (Step A. 9.10 g, 46.4 mmol) and diisopropyl azodicarboxylate (DIAD, 10.23 g, 50 mmol) in dry THF (20 ml) was added drop wise to a solution of 2,6-Dimethylbenzyl alcohol (6.94 g, 51 mmol) and triphenylphosphine (TPP, 13.27 g, 50 mmol) in dry THF (60 ml) at 0C under argon. The reaction mixture was warmed to room temperature for 4 hours or until all the starting material is consumed, diluted with ether and washed with water (2X). The organic layer was dried over Na2SO4, filtered, concentrated, and purified by flash chromatography on a silica gel column (hex: ethyl acetate 2:1) to give the title compound.

According to the analysis of related databases, 62285-58-9, the application of this compound in the production field has become more and more popular.

Reference:
Patent; Wellstat Therapeutics Corporation; O’NEIL, James, Dennen; SHARMA, Shalini; ARUDCHANDRAN, Ramachandran; EP2282736; (2015); B1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Extended knowledge of 62285-58-9

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,62285-58-9, its application will become more common.

Related Products of 62285-58-9, In the chemical reaction process,reaction time,type of solvent,can easily affect the result of the reaction, thereby determining the yield and properties of the reaction product.An updated downstream synthesis route of 62285-58-9 as follows.

To a stirred solution of 2, 6-Dimethylbenzyl alcohol (9.94 g, 73 mmol) was added thionyl chloride (81.55 g, 685 mmol) at room temperature. The reaction mixture was stirred for 6 hours, concentrated under reduced pressure and used without further purification.

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,62285-58-9, its application will become more common.

Reference:
Patent; WELLSTAT THERAPEUTICS CORPORATION; WO2005/18628; (2005); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

A new synthetic route of 62285-58-9

Statistics shows that 62285-58-9 is playing an increasingly important role. we look forward to future research findings about (2,6-Dimethylphenyl)methanol.

Synthetic Route of 62285-58-9, With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.62285-58-9, name is (2,6-Dimethylphenyl)methanol, molecular formula is C9H12O, molecular weight is 136.19, as common compound, the synthetic route is as follows.

To a solution of 2,6-dimethylbenzyl alcohol (456 mg, 3.35 mmol) and triethylamine (0.560 mL, 4.02 mmol) in dichloromethane (CH2Cl2, 15 mL) was added methanesulfonyl chloride (0.258 mL, 3.68 mmol) under ice-cooling and the mixture was stirred for one hour. Thereto was subsequently added lithium bromide (LiBr, 582 mg, 6.70 mmol) under ice-cooling, and the mixture was warmed to room temperature and the mixture was stirred for 2 hours. Thereto was added water to quench the reaction and the reactant was extracted with ethyl acetate and the organic layer was washed twice with water. The organic layer was dried over anhydrous magnesium sulfate and filtered, and the solvent was evaporated under reduced pressure. The resulting residue was purified by silica gel column chromatography to give the title compound 364 mg as colorless oils. 1H-NMR delta (DMSO-d6); 2.37 (6H, s), 4.71 (2H, s), 7.04-7.16 (3H, m).

Statistics shows that 62285-58-9 is playing an increasingly important role. we look forward to future research findings about (2,6-Dimethylphenyl)methanol.

Reference:
Patent; Dainippon Sumitomo Pharma Co., Ltd.; EP1736467; (2006); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

New learning discoveries about 62285-58-9

The synthetic route of 62285-58-9 has been constantly updated, and we look forward to future research findings.

Synthetic Route of 62285-58-9 , The common heterocyclic compound, 62285-58-9, name is (2,6-Dimethylphenyl)methanol, molecular formula is C9H12O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Step B: Preparation of Ethyl 2-(3-(2,6-dimethylbenzyloxy)-4-methoxyphenyl)acetate:; A solution of 2,6-Dimethylbenzyl alcohol (3.23 g, 23.7 mmol) and diisopropyl azodicarboxylate (DIAD, 5.23 g, 25.9 mmol) in THF (20 ml) was added drop wise to a solution of Ethyl 2-(3-Hydroxy-4-methoxyphenyl)acetate (Step A, 5.48 g, 26.12 mmol) and triphenylphosphine (6.79g, 25.9 mmol) in THF (100 ml) at O0C. The reaction mixture was stirred at room temperature for 4 hours, diluted with ether and washed with water and brine. The organic layer was dried over Na2SO4, filtered, concentrated, and purified by flash chromatography on a silica gel column (hex: ethyl acetate 4:1) to give the title compound. 1H NMR (270 MHz, CDCl3): 1.2 (t, 3H); 2.3 (s, 6H); 3.5 (s, 2H); 3.8 (s, 3H); 4.1 (q, 2H); 5.1 (s, 2H); 6.9 (m, 2H); 7.15-7.35 (m, 4H).

The synthetic route of 62285-58-9 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; WELLSTAT THERAPEUTICS CORPORATION; WO2009/151695; (2009); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

The important role of 62285-58-9

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 62285-58-9, (2,6-Dimethylphenyl)methanol.

Researchers who often do experiments know that organic synthesis is a process of preparing more complex target molecules from simple raw materials through one or more chemical reactions. Generally, it requires fewer steps,and cheap raw materials. 62285-58-9, name is (2,6-Dimethylphenyl)methanol. A new synthetic method of this compound is introduced below., Application In Synthesis of (2,6-Dimethylphenyl)methanol

Step C: Preparation of 3-(3-(2,6-dimethylbenzyloxy)phenyl)propanenitrile: A solution of 3-(3-hydroxyphenyl)propanenitrile (Step B, 1.25 g, 8.5 mmol) and diisopropyl azodicarboxylate (DIAD, 1.87 g, 9.26 mmol) in dry THF (10 ml) was added drop wise to a solution of 2.6-Dimethylbenzyl alcohol (1.27 g, 9.3 mmol) and triphenylphosphine (TPP. 2.43 g, 9.26 mmol) in dry THF (30 ml) at 0C under argon. The reaction mixture was warmed to room temperature for 4 hours or until all the starting material is consumed, diluted with ether and washed with water (2X). The organic layer was dried over Na3SO4. filtered, concentrated, and purified by flash chromatography on a silica gel column (hex: ethyl acetate 2:1) to give the title compound.

If you are interested in these compounds, you can also browse my other articles.Thank you for taking the time to read this article. I hope you enjoyed it, 62285-58-9, (2,6-Dimethylphenyl)methanol.

Reference:
Patent; Wellstat Therapeutics Corporation; O’NEIL, James, Dennen; SHARMA, Shalini; ARUDCHANDRAN, Ramachandran; EP2282736; (2015); B1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

The origin of a common compound about 62285-58-9

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,62285-58-9, its application will become more common.

Related Products of 62285-58-9 ,Some common heterocyclic compound, 62285-58-9, molecular formula is C9H12O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

Step B: Preparation of 3-(2,6-Dimethylbenzyloxy)acetophenone To a stirred solution of 3?-Hydroxyacetophenone (8.07 g, 59.24 mmol) and Triphenylphosphine (16.93 g, 64.5 mmol) in dry THF (180 ml) was added dropwise 2,6-Dimethylbenzyl alcohol (8.05 g, 59.24 mmol) and diethyl azodicarboxylate (11.24 g, 64.57 mmol) in dry THF (45 ml) and dry DMF (18 ml) at ambient temperature. After stifling for 1.5 hours at ambient temperature, the reaction mixture was diluted with ether and washed twice with water, 1N NaOH and brine, dried over Na2SO4, filtered and concentrated. The purification was done by flash chromatography on silica gel column (hex: ethyl acetate, 2:1) to provide the title compound. 1H NMR (270 MHz, CDCl3): 2.4 (s, 6H); 2.6 (s, 3H); 5.1 (s, 2H); 7.1 (dd, 2H); 7.2 (m, 2H); 7.4 (t, 1H); 7.6 (m, 2H).

These compound has a wide range of applications. It is believed that with the continuous development of the source of the synthetic route,62285-58-9, its application will become more common.

Reference:
Patent; Wellstat Therapeutics Corporation; Sharma, Shalini; (66 pag.)US9133073; (2015); B2;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Sources of common compounds: (2,6-Dimethylphenyl)methanol

With the rapid development of chemical substances, we look forward to future research findings about 62285-58-9.

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 62285-58-9, name is (2,6-Dimethylphenyl)methanol. This compound has unique chemical properties. The synthetic route is as follows. Application In Synthesis of (2,6-Dimethylphenyl)methanol

A solution of 2,6-Dimethylbenzyl alcohol (5.25 g, 38.6 mmol) and diisopropyl azodicarboxylate (DIAD, 8.49 g, 42 mmol) in THF (30 ml) and DMF (13 ml) was added drop wise to a solution of Ethyl 3-hydroxyphenylacetate (Step A, 6.66 g, 37 mmol) and triphenylphosphine (1 Ig, 42 mmol) in THF (100 ml). The reaction mixture was stirred at room temperature for 4 hours, diluted with ether and washed with water. The organic layer was dried over Na2SO4, filtered, concentrated, and purified by flash EPO chromatography on a silica gel column (hex: ethyl acetate 1:1) to give the title compound.1H NMR (270 MHz5 CDCl3): 1.2 (t, 3H); 2.4 (s, 6H); 3.5 (s, 2H); 4.1 (q, 2H); 5.1 (s, 2H); 6.9 (m, 2H); 7.15-7.35 (m, 5H).

With the rapid development of chemical substances, we look forward to future research findings about 62285-58-9.

Reference:
Patent; WELLSTAT THERAPEUTICS CORPORATION; WO2006/127133; (2006); A2;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts