Category: 109-17-1

Venlafaxine-loaded sustained-release poly(hydroxyethyl methacrylate-co-itaconic acid) hydrogel composites: their synthesis and in vitro/in vivo attributes was written by Ali, Liaqat;Ahmad, Mahmood;Aamir, Muhammad Naeem;Minhas, Muhammad Usman;Rasul, Akhtar;Yousuf, Muhammad;Hussain, Hina;Khan, Jawad Ahmad;Sohail, Muhammad. And the article was included in Iranian Polymer Journal in 2019.Name: ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) This article mentions the following:

Hydrogels have potential applications as sustained-release drug delivery systems, as an example in treatment of major depressive disorders. This paper reports some works carried out to obtain a new type of copolymeric hydrogel for an anti-depressant drug. The copolymerization of itaconic acid, hydroxyethyl methacrylate (HEMA), and tetraethyleneglycol dimethacrylate was performed. The gels were evaluated for swelling, diffusion coefficient, drug incorporation, in vitro dissolution, and in vivo performance in rabbits after oral administration. The pharmacokinetic parameters like bioavailability, C_max and T_max were calculated for hydrogels in comparison to oral solution containing equivalent amount of venlafaxine. The HEMA-based matrixes showed negligible swelling and release rate of venlafaxine, which were also very low in a buffer of pH 1.2. However, both the swelling and release rate of venlafaxine were faster at high pH (6.5 and 7.5). The T_max of the formulation with the highest swelling and release rate (T₁) were found at 600 min compared to that at 180 min for oral solution having equivalent quantity of venlafaxine. However, C_max for oral cross-linked hydrogel composite was significantly lower than that for equivalent amount of oral drug solution The synthesized hydrogel composites showed a promising ability for sustained release of venlafaxine both in vitro and in vivo. It was found that venlafaxine delivery through oral route was practical. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Name: ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Under appropriate conditions, inorganic acids also react with alcohols to form esters. To form these esters, a wide variety of specialized reagents and conditions can be used. Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions.Name: ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Fractography of poly(N-isopropylacrylamide) hydrogel networks crosslinked with mechanofluorophores using confocal laser scanning microscopy was written by Stratigaki, Maria;Baumann, Christoph;van Breemen, Lambert C. A.;Heuts, Johan P. A.;Sijbesma, Rint P.;Goestl, Robert. And the article was included in Polymer Chemistry in 2020.SDS of cas: 109-17-1 This article mentions the following:

Due to their soft and brittle nature, the mech. characterization of polymer hydrogels is a difficult task employing traditional testing equipment. This paper studies poly(N-iso-Pr acrylamide) (PNIPAAm) hydrogel networks with Diels-Alder adducts of π-extended anthracenes as mechanofluorophore crosslinkers. After swelling the networks with varying amounts of water and subjecting them to force, the subsequent fluorescence caused by covalent bond scission is visualized with confocal laser scanning microscopy (CLSM) and the intensities is related to the macroscopic fracture mechanics and the elastic moduli recorded with traditional uniaxial compression. The sensitivity of the mechanofluorophores allowed the anal. of low levels of mech. stress produced through a hand-induced needle-puncturing process and, thus, is an alternative to conventional force application methods. The detection and precise localization of covalent bond scission through CLSM helps elucidating the interrelationship between mol. structure and the macroscopic properties of chem. crosslinked polymeric hydrogels. The micro-scale mechanophore-assisted fractog. can establish a new paradigm for the mech. anal. of soft matter in fields covering traditional polymer and life sciences. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1SDS of cas: 109-17-1).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Converting an alcohol to an alkene requires removal of the hydroxyl group and a hydrogen atom on the neighbouring carbon atom. Dehydrations are most commonly carried out by warming the alcohol in the presence of a strong dehydrating acid, such as concentrated sulfuric acid.SDS of cas: 109-17-1

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Photopolymerizable nanogels as macromolecular precursors to covalently crosslinked water-based networks was written by Dailing, Eric A.;Setterberg, Whitney K.;Shah, Parag K.;Stansbury, Jeffrey W.. And the article was included in Soft Matter in 2015.Related Products of 109-17-1 This article mentions the following:

We present a strategy for directly and efficiently polymerizing aqueous dispersions of reactive nanogels into covalently crosslinked polymer networks with properties that are determined by the initial chem. and phys. nanogel structure. This technique can extend the range of achievable properties and architectures for networks formed in solution, particularly in water where monomer selection for direct polymerization and the final network properties are quite limited. Nanogels were initially obtained from a solution polymerization of a hydrophilic monomethacrylate and either a hydrophilic PEG-based dimethacrylate or a more hydrophobic urethane dimethacrylate, which produced globular particles with diameters of 10-15 nm with remarkably low polydispersity in some cases. Networks derived from a single type of nanogel or a blend of nanogels with different chemistries when dispersed in water gelled within minutes when exposed to low intensity UV light. Modifying the nanogel structure changes both covalent and non-covalent secondary interactions in the crosslinked networks and reveals critical design criteria for the development of networks from highly internally branched, nanoscale prepolymer precursors. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Related Products of 109-17-1).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. A strong base can deprotonate an alcohol to yield an alkoxide ion (R―O−). For example, sodamide (NaNH2), a very strong base, abstracts the hydrogen atom of an alcohol. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Related Products of 109-17-1

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Polymer-Network Toughening and Highly Sensitive Mechanochromism via a Dynamic Covalent Mechanophore and a Multinetwork Strategy was written by Watabe, Takuma;Aoki, Daisuke;Otsuka, Hideyuki. And the article was included in Macromolecules (Washington, DC, United States) in 2022.Application In Synthesis of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) This article mentions the following:

Multinetwork (MN) elastomers exhibit outstanding mech. properties that arise from the sacrificial first network (FN). Here, we report the mech. and mechanochromic properties of an MN elastomer with a difluorenylsuccinonitrile (DFSN) moiety incorporated into the crosslinking points of its FN. DFSN is a mechanochromophore that affords stable, pink radical intermediates upon exposure to mech. stimuli. We distinctly demonstrated that the replacement of a conventional cross-linker by a weaker cross-linker does have a direct effect on the stress-strain behavior of elastomers to improve fracture toughness. The toughening mechanism of the DFSN-containing MN elastomers was revealed through a highly sensitive and quant. anal. of the mech. activated stable radicals by ESR spectroscopy. We also clarified that the MN strategy is an effective technique to achieve high activation of the mechanophores at a lower threshold strain. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Application In Synthesis of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. A strong base can deprotonate an alcohol to yield an alkoxide ion (R―O−). For example, sodamide (NaNH2), a very strong base, abstracts the hydrogen atom of an alcohol. Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions.Application In Synthesis of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Poly(Hydroxypropyl methacrylate-co-glycidyl methacrylate): Facile synthesis of well-defined hydrophobic gels containing hydroxy-functional methacrylates was written by Orakdogen, Nermin;Sanay, Berran. And the article was included in Polymer Degradation and Stability in 2017.Synthetic Route of C16H26O7 This article mentions the following:

A range of well-defined hydrophobic hydroxy-functional methacrylate-based gels has been synthesized by free-radical crosslinking copolymerization of the monomers Hydroxypropyl methacrylate (HPMA) and Glycidyl methacrylate (GMA). Particularly, the effect of the hydrophobic functional groups of the comonomer GMA on the elasticity and swelling properties was investigated in order to understand the exact interactions and the consequent changes in the phys. characteristics of poly(Hydroxypropyl methacrylate-co-glycidyl methacrylate) P(HPMA-co-GMA) hydrogels as well as cryogels. In addition, measuring and understanding how to control the mech. response of the resulting gels which usually refers to the resistance to failure by fracture or excessive deformation can help the targeted design of specific applications with extended functionality. In the light of the exptl. findings, it was suggested that the studied system with the monomers HPMA and GMA containing both acrylic and epoxy groups provides the design and performance versatility required for the most demanding coating and resin applications. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Synthetic Route of C16H26O7).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Under appropriate conditions, inorganic acids also react with alcohols to form esters. To form these esters, a wide variety of specialized reagents and conditions can be used. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Synthetic Route of C16H26O7

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Antistaphylococcal and biofilm inhibitory activities of Frangula alnus bark ethyl-acetate extract was written by Djukanovic, Stefana;Cvetkovic, Stefana;Loncarevic, Branka;Ljesevic, Marija;Nikolic, Biljana;Simin, Natasa;Bekvalac, Kristina;Kekic, Dusan;Mitic-Culafic, Dragana. And the article was included in Industrial Crops and Products in 2020.Computed Properties of C16H26O7 This article mentions the following:

Since that we are facing with a serious problem of bacterial resistance it is necessary to find a new antibacterial agents in fight with it. Frangula alnus is traditionally used plant but its antibiofilm potential is poorly investigated. The aim of the study was to investigate antibiofilm activity of F. alnus ethyl-acetate extract (FA) toward S. aureus ATCC strains and clin. isolates as well as its influence on respiration in planktonic and biofilm form. The qual. GCxGC-MS and quant. LC-MS/MS anal. revealed that FA extract was rich in phenols and flavonoids and emodin, chatechin, and ester 4-ethoxy benzoic acid were the most dominant components. Results obtained through microdillution assay showed that FA possesses strong antibacterial activity. Furthermore, crystal violet staining of biofilm biomass demonstrated that extract had strong effect on biofilm formation of all tested strains while effect on preformed biofilms was less pronounced. The effect on biofilm was confirmed with SEM where the changes in biofilm structure were noticed. The activity of extract on the consumption of O2 and production of CO2 was monitored using the Micro-Oxymax respirometer. Interestingly, respiration of the most strains was decreased in planktonic form as well as in biofilms. Results obtained in this study are a good basis for further research in order to discover the mechanism of action of the FA extract on connection between biofilm and respiration. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Computed Properties of C16H26O7).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Because alcohols are easily synthesized and easily transformed into other compounds, they serve as important intermediates in organic synthesis. Secondary alcohols are easily oxidized without breaking carbon-carbon bonds only as far as the ketone stage. No further oxidation is seen except under very stringent conditions.Computed Properties of C16H26O7

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Differences in molecular structure in cross-linked polycationic nanoparticles synthesized using ARGET ATRP or UV-initiated polymerization was written by Forbes, D. C.;Peppas, N. A.. And the article was included in Polymer in 2013.Related Products of 109-17-1 This article mentions the following:

This work compares material properties of polycationic nanoparticles synthesized using the techniques of UV-initiated polymerization or ARGET ATRP and relates differences in material properties to differences in mol. structure. The nanoparticles are based on the pH-responsive monomer 2-(diethylamino)ethyl methacrylate (DEAEMA) copolymerized with poly(ethylene glycol) Me ether methacrylate (PEGMA), tert-Bu methacrylate (tBMA), and tetraethylene glycol dimethacrylate (TEGDMA) in a surfactant-stabilized monomer-in-water emulsion to form cross-linked nanoscale hydrogels. ARGET ATRP resulted in a narrower distribution of mol. weight for linear analogs of the polycationic nanoparticles. In addition, ARGET ATRP formulations showed a sharper glass transition than UV-initiated formulations, indicating increased homogeneity. These networks could be used as drug delivery carriers or for other nanogel applications that would benefit from polycationic nanoparticles with high homogeneity. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Related Products of 109-17-1).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. The oxygen atom of the strongly polarized O―H bond of an alcohol pulls electron density away from the hydrogen atom. This polarized hydrogen, which bears a partial positive charge, can form a hydrogen bond with a pair of nonbonding electrons on another oxygen atom. The most common reactions of alcohols can be classified as oxidation, dehydration, substitution, esterification, and reactions of alkoxides.Related Products of 109-17-1

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Study of dehydration and water states in new and worn soft contact lens materials was written by Krysztofiak, Katarzyna;Szyczewski, Andrzej. And the article was included in Optica Applicata in 2014.Application In Synthesis of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) This article mentions the following:

The purpose of this study was to examine the in vitro dehydration characteristics of new and worn conventional and silicone-hydrogel contact lenses. Four contact lens materials were investigated: three conventional hydrogels (etafilcon, nelfilcon, omafilcon) and one silicone-hydrogel (narafilcon). Gravimetric data were obtained with anal. balance with 1 min intervals. Quant. parameters of water content and dehydration rate were calculated allowing quant. description of dehydration process. Differential scanning calorimetry was used to monitor changes in water states in samples studied. As expected, dehydration behavior of each material is different in terms of mean dehydration rate values and phases of dehydration. Gravimetric data allowed us to distinguish three phases of dehydration. Interestingly, the effect of the osmolality of storing solutions on dehydration was found – lenses stored in hyperosmotic solutions needed more time to achieve equilibrium with the environment. Effect of wearing on dehydration patterns and water properties was confirmed. In worn samples, a decrease in water content was observed Addnl., there was a change in water structure after 6 h of wearing in all lenses studied. This behavior may be ascribed to tear film components deposition and changes in surface wettability that appear during wearing. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Application In Synthesis of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Alcohols are weak acids. The most acidic simple alcohols (methanol and ethanol) are about as acidic as water, and most other alcohols are somewhat less acidic. Grignard and organolithium reagents are powerful tools for organic synthesis, and the most common products of their reactions are alcohols.Application In Synthesis of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Smart hydrogels designed for use in microfabricated sensor arrays was written by Bates, Jeffrey S.;Cho, Seung Hei;Tathireddy, Prashant;Rieth, Loren W.;Magda, Jules J.. And the article was included in MRS Online Proceedings Library in 2013.Safety of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) This article mentions the following:

Hydrogels are considered smart materials because they respond to environmental stimuli. Sensors that monitor the body’s pH levels would be helpful for doctors to determine the severity of a patient’s condition, especially if they exhibit signs of shock. The motivation of this project is to create a biomedical device that can be worn sublingually or implanted into the body to help doctors with diagnosing a patient’s condition. The magnitude of the swelling/deswelling behavior can be measured by placing a sample of the hydrogel in a piezoresistive sensor. The degree of swelling/deswelling is directly proportional to the change in pH of the aqueous solution it is placed in. In this study, a variety of compositions of pH responsive hydrogels were designed and tested to determine the response time and magnitude for use in both macro and micro sensor arrays. This pressure sensor has been designed for use with thinner gels than have been used in the past. The results for swelling time and magnitude were compared to determine the effect of the thickness of the hydrogel samples on the swelling/deswelling kinetics of the material in order to find the appropriate composition, thickness and device that will yield the desired response rate and sensitivity. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Safety of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Alcohols may be oxidized to give ketones, aldehydes, and carboxylic acids. These functional groups are useful for further reactions. Oxidation of organic compounds generally increases the number of bonds from carbon to oxygen (or another electronegative element, such as a halogen), and it may decrease the number of bonds to hydrogen.Safety of ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate)

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Polycationic Nanoparticles for siRNA Delivery: Comparing ARGET ATRP and UV-Initiated Formulations was written by Forbes, Diane C.;Peppas, Nicholas A.. And the article was included in ACS Nano in 2014.Product Details of 109-17-1 This article mentions the following:

In this work, we develop and evaluate polycationic nanoparticles for the delivery of small interfering RNA (siRNA). Delivery remains a major challenge for translating siRNA to the clinic, and overcoming the delivery challenge requires effective siRNA delivery vehicles that meet the demands of the specific delivery strategy. Crosslinked polycationic nanoparticle formulations were synthesized using ARGET ATRP or UV-initiated polymerization The one-step, one-pot, surfactant-stabilized monomer-in-water synthesis technique may provide a simpler and faster alternative to complicated, multistep techniques and an alternative to methods that rely on toxic organic solvents. The polymer nanoparticles were synthesized using the cationic monomer 2-(diethylamino)ethyl methacrylate, the hydrophobic monomer tert-Bu methacrylate to tune pH responsiveness, the hydrophilic monomer poly(ethylene glycol) Me ether methacrylate to improve biocompatibility, and crosslinking agent tetraethylene glycol dimethacrylate to enhance colloidal stability. Four formulations were evaluated for their suitability as siRNA delivery vehicles in vitro with the human embryonic kidney cell line HEK293T or the murine macrophage cell line RAW264.7. The polycationic nanoparticles demonstrated efficient and rapid loading of the anionic siRNA following complexation. Confocal microscopy as well as flow cytometry anal. of cells treated with polycationic nanoparticles loaded with fluorescently labeled siRNA demonstrated that the polycationic nanoparticles promoted cellular uptake of fluorescently labeled siRNA. Knockdown experiments using polycationic nanoparticles to deliver siRNA demonstrated evidence of knockdown, thus demonstrating potential as an alternative route to creating polycationic nanoparticles. In the experiment, the researchers used many compounds, for example, ((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1Product Details of 109-17-1).

((Oxybis(ethane-2,1-diyl))bis(oxy))bis(ethane-2,1-diyl) bis(2-methylacrylate) (cas: 109-17-1) belongs to alcohols. Alcohols are among the most common organic compounds. They are used as sweeteners and in making perfumes, are valuable intermediates in the synthesis of other compounds, and are among the most abundantly produced organic chemicals in industry. Alcohols may be oxidized to give ketones, aldehydes, and carboxylic acids. These functional groups are useful for further reactions. Oxidation of organic compounds generally increases the number of bonds from carbon to oxygen (or another electronegative element, such as a halogen), and it may decrease the number of bonds to hydrogen.Product Details of 109-17-1

Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts