Some low molecular weight alcohols of industrial importance are produced by the addition of water to alkenes. 527-07-1, formula is C6H11NaO7, Ethanol, isopropanol, 2-butanol, and tert-butanol are produced by this general method. Two implementations are employed, the direct and indirect methods. SDS of cas: 527-07-1
Zou, Shuai;Xiao, Jianzhuang;Duan, Zhenhua;Ding, Tao;Hou, Shaodan research published 《 On rheology of mortar with recycled fine aggregate for 3D printing》, the research content is summarized as follows. This study explores the feasibility of utilizing recycled fine aggregates (RFA) in 3D mortar printing (3DMP) by evaluating the properties of 3D printing (3DP) mixtures with different contents of RFA (0%, 50%, and 100%) as well as sodium gluconate (0%, 0.6%, and 1.2%) before and after high-rate shearing from the perspective of rheol., failure pattern and buildability. The results showed that, the incorporation of RFA highly increased the 3DP mixture’s initial value and time-varying rate of the static yield stress, viscosity and area of thixotropy hoop, while adding sodium gluconate decreased them resp. Meanwhile, since high-rate shearing were found to highly decrease the mentioned rheol. parameters of 3DP mixtures, a feeding system which can provide high-rate and continuous shearing was recommended in practical printing to prolong the open time of printing mixtures Besides, a dimensionless buildability parameter λ was proposed and defined as the ratio of accumulated offsets (whether compression or tension) to the theor. height to describe the buildability of 3DP mixtures, which exhibited much higher accuracy than the maximum printing layer, maximum printing height and average vertical strain, resp.
SDS of cas: 527-07-1, Sodium Gluconate is the sodium salt of gluconic acid with chelating property. Sodium gluconate chelates and forms stable complexes with various ions, preventing them from engaging in chemical reactions.
Sodium gluconate is an organic sodium salt having D-gluconate as the counterion. It has a role as a chelator. It contains a D-gluconate.
D-Gluconic acid sodium salt is a glycol ether that is used as an injection solution. It has been shown to have antibacterial efficacy against wild-type strains of bacteria such as Escherichia coli, Pseudomonas aeruginosa, and Staphylococcus aureus. The in vitro antimicrobial action of D-gluconic acid sodium salt was found to be due to its ability to inhibit bacterial growth by interfering with the synthesis of DNA. D-gluconic acid sodium salt also has been shown to have antihypertensive effects in rats through the inhibition of angiotensin II type 1 receptor (AT1) signaling pathway and erythrocyte proliferation. This drug also has been shown to bind benzalkonium chloride and x-ray diffraction data show that it is crystalline in nature. The analytical method for determining the concentration of D-gluconic acid sodium salt is by electrochemical impedance, 527-07-1.
Referemce:
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts