Month: March 2022

Adding a certain compound to certain chemical reactions, such as: 1875-89-4, 2-(m-Tolyl)ethanol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Formula: C9H12O, blongs to alcohols-buliding-blocks compound. Formula: C9H12O

Example 8-2- [2- (3-methylphenyl) ethoxy]-2′, 3′, 5-TRI-O-(TERT- butyldimethylsilyl)-adenosine [54] To a dry 250-mL, 3-neck roundbottom flask was added 2-chloro- 2′, 3′, 5-TRI-O-(TERT-BUTYLDIMETHYLSILYL) adenosine (5 g, 7.8 mmol, Example 1) and 2- (3-methylphenyl) ethanol (15 mL). The mixture was flushed with nitrogen for 5-10 minutes, then heated to 50 °C. To this mixture was added sodium hydride (1.56 g, 39 mmol, as a 60percent dispersion in mineral oil) at such a rate as to avoid excessive gas evolution. The reaction was maintained at 50 °C until the predominant component was the product by HPLC (partially deprotected products were also seen). The reaction was then cooled to room temperature, carefully quenched with water (40 mL), and extracted with ethyl acetate (3 x 100 mL). The combined organic extracts were washed with brine (120 mL), dried (MGS04), filtered, and concentrated under reduced pressure to afford a brown oil. This material was purified by passing through a plug of silica gel, eluting with CH2CL2, 5percent methanol in CHSCIS, and 10percent methanol in CH2CL2. Those fractions containing products were combined and evaporated to dryness, to afford a mixture of starting material and monosilyl-protected and disilyl-protected alkylated products in a ratio of 2: 5: 12.This mixture was used without further purification in the next step

The synthetic route of 1875-89-4 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KING PHARMACEUTICALS RESEARCH & DEVELOPMENT, INC.; WO2005/33121; (2005); A2;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Synthetic Route of 205877-13-0 ,Some common heterocyclic compound, 205877-13-0, molecular formula is C8H11NO2, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

To a solution of 1.3g (5.9mmol) di-tert-butyl dicarbonate in 12mL anhydrous THF under N2 atmosphere, 0.83g (5.4mmol) (2-amino-3-methoxyphenyl)methanol31 was added and the resulting solution was stirred at 40C for 20h. The solvent was evaporated under reduced pressure and FCC with EtOAc and hexanes (1:3, Rf 0.6) gave 0.79g (3.1mmol, 58%) of 3c as a white solid. Mp: 112C. IR (ATR): 3463, 3361, 3274, 3016, 2924, 1686, 1531, 1158cm-1. 1H NMR (500MHz, CDCl3) delta=7.18-7.12 (m, 1H), 7.04 (dd, J=7.8, 1.3Hz, 1H), 6.79 (dd, J=8.3, 1.3Hz, 1H), 6.52 (br s, 1H), 4.50 (d, J=5.8Hz, 2H), 4.14 (br s, 1H), 3.77 (s, 3H), 1.49 (s, 9H). 13C NMR (126MHz, CDCl3) delta=155.8, 153.1, 137.9, 126.8, 124.0, 122.3, 110.0, 80.7, 61.8, 55.6, 28.1. MS (EI+): m/z calcd for (C13H19NO4) 253.1314, found 253.1327.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 205877-13-0, (2-Amino-3-methoxyphenyl)methanol, other downstream synthetic routes, hurry up and to see.

Reference:
Article; Popp, Tobias Alexander; Uhl, Edgar; Ong, Duc Nghia; Dittrich, Sebastian; Bracher, Franz; Tetrahedron; vol. 72; 13; (2016); p. 1668 – 1674;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.13588-28-8, name is 2-(2-Methoxypropoxy)propan-1-ol, molecular formula is C7H16O3, molecular weight is 148.2001, as common compound, the synthetic route is as follows.Recommanded Product: 2-(2-Methoxypropoxy)propan-1-ol

In a thermometer,Distillation column, condenser,Water separator 1000ml glass four-necked flask,Add dipropylene glycol methyl ether 296g, acetic acid 132g,The molar ratio of dipropylene glycol methyl ether and acetic acid is 1: 1.1,Acid ionic liquid catalyst 1-butyl-3-methyl imidazole bisulfate dosage of 17.1g,The dehydrating agent cyclohexane was 148 g,The temperature was raised and the reaction was kept in boiling (80-160 C)Back to divert water,4h reaction was completed, the reaction was weighed,Gas chromatography analysis of the reaction solution of dipropylene glycol methyl ether acetate content, the calculated yield of 98.4%.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,13588-28-8, 2-(2-Methoxypropoxy)propan-1-ol, and friends who are interested can also refer to it.

Reference:
Patent; Jiangsu Tianyin Chemical Co., Ltd.; Qin Yisheng; Qin Xiaoqi; Yang Jianguo; Zhang Xuejun; Chen Rongfu; (7 pag.)CN106966898; (2017); A;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

With the rapid development and complex challenges of chemical substances, the synthesis of new drugs is usually one of the most effective ways to increase yield.81335-87-7, name is (2-Amino-4-methylphenyl)methanol, molecular formula is C8H11NO, molecular weight is 137.18, as common compound, the synthetic route is as follows.Safety of (2-Amino-4-methylphenyl)methanol

To a solution of (2-amino-4-methylphenyl)-methanol (3.2 g, 23.4 mmol) in THF (40 mL) is added di-ferf-butyl dicarbonate (6.54 g, 28.0 mmol) and the solution is stirred at 60 0C for 5 h. The solvent is evaporated, and water is added. It is then extracted with EtOAc, washed with water, dried with MgSO4 and concentrated. The residue is purified to give the title compound.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,81335-87-7, (2-Amino-4-methylphenyl)methanol, and friends who are interested can also refer to it.

Reference:
Patent; NOVARTIS AG; NOVARTIS PHARMA GmbH; WO2007/67612; (2007); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

The major producers of chemicals have been the Europe, Japan and China. Due to the growing call for a cleaner, greener environment, people will have to find innovative ways to maintain their relevance. Here is a compound 13651-14-4, name is (2,3-Dimethylphenyl)methanol. This compound has unique chemical properties. The synthetic route is as follows. SDS of cas: 13651-14-4

To a dichloromethane solution (0.2 M) of (2,3-dimethylphenyl)methanol (1 eq.) from the previous step was added triethylamine (1.2 eq.) and then methanesulfonyl chloride (1.1 eq.) at 0 0C. The reaction mixture was stirred at 0 0C for 20 min before it was quenched with sat. aq. NaHCO3. The aqueous layer was separated and back-extracted with dichloromethane. The combined organic extracts were then dried over Na2SO4, filtered and the filtrate concentrated in vacuo to furnish the title compound as a colorless oil.

With the rapid development of chemical substances, we look forward to future research findings about 13651-14-4.

Reference:
Patent; MERCK FROSST CANADA LTD.; CHIH-YU CHEN, Austin; LALIBERTE, Sebastien; LAROUCHE, Guillaume; HAN, Yongxin; MCKAY, Daniel; WO2011/20193; (2011); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Application of 813-99-0 ,Some common heterocyclic compound, 813-99-0, molecular formula is C5H9Cl3O, its traditional synthetic route has been very mature, but the traditional synthetic route has various shortcomings, such as complicated route, low yield, poor purity, etc., below Introduce a new synthetic route.

EXAMPLE 46; Preparation of 8-[4-(Difluoromethoxy)phenyl]-8-[3-(2-fluoropyridin-3-yl)phenyl]-2,8-dihydrospiro[imidazo[1,5-a]pyrimidine-3,3′-oxetan]-6-amine; Step a) Preparation of Compound 2; A mixture of 1 (1.0 g, 5.22 mmol) and potassium hydroxide (0.345 g of 85%, 5.22 mmol) in ethanol (2 mL) was heated at reflux for 3 h. The reaction was cooled to room temperature, diluted with ethyl acetate (10 mL) and the solids that formed removed by filtration. The filtrate was concentrated to afford 2 (0.65 g, 80%) as a colorless liquid: 1H NMR (300 MHz, CDCl3) delta 4.47 (s, 4H), 3.95 (s, 4H).

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 813-99-0, 3-Chloro-2,2-bis(chloromethyl)propan-1-ol, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Wyeth; US2005/282826; (2005); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

In the next few decades, the world population will flourish. As the population grows rapidly and people all over the world use more and more resources, all industries must consider their environmental impact. 15100-35-3, name is Bicyclo[4.2.0]octa-1,3,5-trien-7-ylmethanol, the common compound, a new synthetic route is introduced below. COA of Formula: C9H10O

Step B. p-Toluenesulfonyl chloride (662 mg, 3.47 mmol), triethylamine (0.605 ml), and DMAP (35 mg, 0.29 mmol) were added to a solution of bicyclo[4.2.0]octa-1,3,5-trien-7-ylmethanol (388 mg, 2.89 mmol) in dichloromethane (12 mL) at room temperature and the reaction mixture was stirred overnight. Saturated aqueous NH4CI was added to the reaction mixture, and the mixture was extracted with dichloromethane, dried over MgSO4 and purified by chromatography (5-20% EtOAc/hexanes) to provide bicyclo[4.2.0]octa-1,3,5-trien-7-ylmethyl 4-methylbenzenesulfonate (830 mg, 99%).

The synthetic route of 15100-35-3 has been constantly updated, and we look forward to future research findings.

Reference:
Patent; KNOPP BIOSCIENCES LLC; Resnick, Lynn; Topalov, George T.; Boyd, Steven A.; Belardi, Justin K.; Flentge, Charles A.; Hale, James S.; Harried, Scott S.; Mareska, David A.; Zhang, Kai; Heap, Charles R.; Hadden, Mark; Cui, Wenge; Decornez, Helene; Liu, Shuang; (146 pag.)US2016/31875; (2016); A1;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Reference of 55357-38-5, Adding some certain compound to certain chemical reactions, such as: 55357-38-5, name is 2-Hydroxy-N,N,N-trimethylethanaminium 4-methylbenzenesulfonate,molecular formula is C12H21NO4S, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound 55357-38-5.

P1-(cytidin-5′-yl)-P2-(trimethylammoniumethyl)-methylenebis(phosphonate) is an analog of cytidyl diphosphocholine (citicholine), an important intermediate in lipid metabolism and a drug under development for treatment for ischemic stroke. The analog may be prepared by the reaction of the appropriate BTA with a p-toluenosulfonate salt of choline. Thus, a mixture of the BTA prepared from N4-acetylcytidin-5′-ylphosphonomethylenephosphonic acid (1 mmol in 10 ml of dry pyridine) and p-toluenosulfonate salt of choline (412 mg, 1.5 mmol) is kept at 55C for 4 hours. The mixture is processed as described in Example 3. P1-(N4-acetyl-2′,3′-O-isopropylidenecytidin-5′-yl)-P2-(trimethylammoniumethyl)-methylenebisphosphonate is obtained, and deprotected with Dowex 50WX8/H+ to give the desired compound.

In the field of chemistry, the synthetic routes of compounds are constantly being developed and updated. I will also mention this compound in other articles. 55357-38-5, 2-Hydroxy-N,N,N-trimethylethanaminium 4-methylbenzenesulfonate, other downstream synthetic routes, hurry up and to see.

Reference:
Patent; Pharmasset, Ltd.; EP1469003; (2004); A2;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 54410-90-1, 4-Pentylcyclohexanol, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Computed Properties of C11H22O, blongs to alcohols-buliding-blocks compound. Computed Properties of C11H22O

Step 2:2L four bottles of the first step to add 200.8g (1179.0mmol, 1.0eq), 800.0 g of dichloroethane, 131.2 g (1279.0 mmol, 1.1 eq) of triethylamine, 14.4 g (117.8 mmol, 0.1 eq) of 4-dimethylaminopyridine,Into the ice machine cooling to -5 ~ 0 stand.A solution of 148.6 g (1297.0 mmol, 1.1 eq) of methanesulfonyl chloride and 200.8 g of dichloroethane was added dropwise over 1.5 h, and the dropping temperature was controlled at -5 to 5 C,Followed by 0 ~ 5 insulation stirring 1.0h.Add water 600g quenching reaction, then stop the cooling, the kettle temperature to room temperature, stirring 0.5h, standing for 0.5h, divided into an oil layer 1268.0g, the water back to the kettle by adding dichloroethane 200.0g secondary extraction, stirring 0.5 h, standing for 0.5h, separate the secondary reservoir 188.7g.Combined with a secondary oil layer, add water 400.0g washing, stirring 0.5h, standing for 0.5h, separated from the oil layer, desolvation, the use of ethanol to get 260.0g two-step product, the content of> 98%, yield 88% Cis – trans isomer ratio 56/44.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,54410-90-1, 4-Pentylcyclohexanol, and friends who are interested can also refer to it.

Reference:
Patent; Dalian Jiu Xin Fine Chemical Co., Ltd.; Dai Yao; Liang Quande; Zhao Danyang; Liu Lingling; Wang Weixin; Wang Rongliang; (5 pag.)CN106916089; (2017); A;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts

Adding a certain compound to certain chemical reactions, such as: 55357-38-5, 2-Hydroxy-N,N,N-trimethylethanaminium 4-methylbenzenesulfonate, can increase the reaction rate and produce products with better performance than those obtained under traditional synthetic methods. Here is a downstream synthesis route of the compound, Formula: C12H21NO4S, blongs to alcohols-buliding-blocks compound. Formula: C12H21NO4S

(R) -1,2-glyceryl distearate-glycerol-3-phosphatidic acid (0.2 g, 0.28 mmol)Was added to 60 mL of dry pyridine,It was heated at 50 0.5h,Then, choline p-toluenesulfonate (0.84 g, 3 mmol)And trichloroacetonitrile 5mL,The reaction was continued at 50 36h,Concentration under reduced pressure crude,Flash column chromatography (developing solvent CHCl3-CH3OH-H2O, 15: 5: 1) gave a white gel, 0.13 g, 59% yield.

At the same time, in my other blogs, there are other synthetic methods of this type of compound,55357-38-5, 2-Hydroxy-N,N,N-trimethylethanaminium 4-methylbenzenesulfonate, and friends who are interested can also refer to it.

Reference:
Patent; Ji, Min; Cai, Jin; Gu, Ning; Li, Rui; (7 pag.)CN103408588; (2016); B;,
Alcohol – Wikipedia,
Alcohols – Chemistry LibreTexts